Assembly

The assembly of a free-standing bulletin board is roughly as follows:

1. Embed U-girder U100 of prescribed length in concrete with the help of the template and allow to set

2. Fix aluminium profile side sections in place and align; shorten one side if necessary

3. Measure bracket fastening points for poster surface and screw in place

4. Insert cassettes and screw in place at top

5. Screw upper cross section into place

6. Latch plastic profile sections into the aluminium stands

7. Screw tops onto stands

8. Glue.

The assembly of a board
(naturally without the foundation)
only takes about 20 – 30 minutes